Hangzhou Altrasonic Technology Co., Ltd
MAKE IMPOSSIBLE POSSIBLE
Add to Cart
BT40 Ultrasonic Spindle Tool Holder for Assisted Machining System ultrasound parts for milling machine
Specification:
| Frequency | 20 Khz |
| Output Power | 1000 W |
| Voltage | 220 V |
| Switch | Handle or foot switch |
| Power Adjusting | Step or continuous |
| Working Time Control | 24 Hours |
| Weignt | 30 KG ( Determined by the size of the horn ) |
| Generator | Digital Generator |
Ultrasonic milling has proven to be an effective technique for improving titanium, aluminum and stainless steel workability. Under the action of ultrasonic milling, it has more advantage than the traditional milling. In contrast to the effect of ultrasonic machining aluminum, steel, stainless steel, titanium four metallic materials.Improved surface quality of the most prominent is the titanium and aluminum, can improve the cutting ability of the most prominent is the stainless steel, the quality of the workpiece side is the most significant improvement in steel. In addition, for steel quenching after nearly HRC60, the traditional tool is difficult of steel cutting and processing cost is high, only when its hardness is higher than the work piece tool HRC25 above to processing. However, on the basis of traditional tools added to ultrasound, can greatly reduce the cutting of cutting resistance and improve cutting surface quality, but also increase the service life of the tool at least doubled.
Principle:
Ultrasonic machining process uses a power supply that converts conventional line voltage to 20KHz
electrical energy.
This high-frequency electrical energy is provided to a piezoelectric converter that changes high frequency electrical energy into mechanical motion.
The ultrasonic motion from the converter is amplified and transmitted to the horn and cutting tool.
This causes the horn and attached cutting tool to vibrate perpendicularly to the tool face thousands of
times per second with no side to side motion.
A recirculating pump forces E/Z Pump™ abrasive, suspended in a liquid medium, between the vibrating
tool face and the workpiece. The abrasive particles strike the workpiece at 150,000 times their own weight.
These tiny abrasive particles chip off microscopic flakes and grind a counterpart of the tool face.
Main advantages of ultrasonic machining:
1. Compared with diamond drilling process, the tool wear rate with rotary ultrasonic machining is about 85 % lower.
2. The cutting force and surface roughness with rotary ultrasonic machining are lower than those with diamond grinding.
3. The tool with slots reduces cutting force but increases surface roughness and tool wear, compared with the tool without slots.
Applications
1. Applying in elaborate processing for various kinds of materials especially fragile rigid material. The milling process by using rotate milling cutter is suit for processing plane, groove, all kinds of form surface (such as spline, gear and thread) and special surface of mould.
2. Application area: machining industry, machine tool equipment manufacturing
3. Application occasion: manufacturing enterprise, universities and colleges, scientific research institution, mechanical equipment transformation industry
