
Add to Cart
50Khz Ultrasonic spray nozzle supplier titanium horn for spray drying
Principle:
The Ultrasonic power supply converts 50/60 Hz to frequency electrical energy. This electrical energy is transmitted to the piezoelectric transducer within the converter, where it is changed to mechanical vibrations. The ultrasonic vibrations are intensified by the probe and focused at the tip where the atomization takes place. The liquid travels through the probe, and spreads out as a thin film on the atomizing surface. The oscillating tip disintegrates the liquid into micro-droplets, and ejects them to form a gentle, low velocity spray.
Specifications:
Model | HS-N60 | HS-N50A | HS-N50B | HS-N50C | HS-N40 | HS-N30 | HS-N20 | HS-N15 |
Frequency | 60KHz | 50KHz | 50KHz | 50KHz | 40KHz | 30KHz | 20 KHz | 15 KHz |
Atomization Volume | 0.5L/H | 2 L/H | 2 L/H | 2 L/H | 10 L/H | 70 L/H | 100 L/H | 150 L/H |
Average Particle Diameter of Fog | 20um | 28um | 28um | 28um | 32um | 39um | 51um | 62um |
Power Consumption | 0.01 Degrees/Kg | 0.001 Degrees/Kg | ||||||
Atomization Head Structure | Cylindrical | Horn | ||||||
Power | 30W | 30 W | 30 W | 30 W | 60 W | 100 W | 300 W | 500 W |
The Application of Atomizing Media | Ordinary water, a variety of liquid substances, chemical liquid, a variety of oil mucus, metal melt and so on |
· From micro-litres to litres – continuous or intermittent
· Dispenses material with virtually no over spray
· Pressure-less atomization – low velocity mist
· Low cost atomization probe replacement
· Minimal atmospheric contamination
· Virtually unclog gable
· Programmable operation
· Multiple probe operation
· No heating / No temperature rise
· Increase of humidity level
· Coating non-woven fabric, paper, etc…
· Laboratory spray drying
· Injection moisture into a gas stream
· Applying minute amount of oil, fragrance or flavour onto a product
· Injecting small volume of reagents into a reactor